Thiết bị hiển thị SIRAX BM1450

Thiết bị hiển thị SIRAX BM1450

LIÊN HỆ Vui lòng liên hệ để nhận báo giá phù hợp
Yêu cầu báo giá LIÊN HỆ ĐỂ CÓ GIÁ TỐT
Thanh toán an toàn
Hỗ trợ chuyên nghiệp
Đổi trả dễ dàng
Giao hàng tận nơi

The SIRAX BM1450 multifunctional DC energy meter can be used for monitoring
and controlling in DC systems.

These meters measure a wide range of electrical parameters such as DC
voltage, current, power, energy and many more. It supports bi-directional
voltage and current measurement, 1 channel voltage input, 4 channel current
input and 4 relay outputs. The large 4 line 8 digit LED display provides easy to
read data directly on the meter front. The configuration can be done on site via
three push buttons or via RS485/Modbus RTU.

  • Measuring input:
    Nominal voltage 57.7...277 VLN, 100...480 VLL
    Nominal current 1 / 5 A
    Frequency range 45...50/60...66 Hz
  • System type: three-phase, 3 or 4-wire asymmetrical
  • Power supply : 100...250 V AC/DC
  • Accuracy: 
    Voltage and current ±0.5 %
    Active and reactive power ±0.5 %
    Power factor ±3.0°
    THD U,I ±1.0 %
    Active energy Class 0.5
    Reactive energy Class 2
  • Outputs: Analog 2 x 4...20mA, Relays 1 NO / 1 NC
  • Interface: RS485 (Modbus RTU), Ethernet (Modbus TCP)
  • Display: LED display, 3 lines, 4 digits each, measured values
  • Meters: Active and reactive energy meter incoming and outgoing
    Counters: Operating hours counter for one consumer and the device itself
  • Safety: 
    Double insulation
    Degree of pollution: 2
    Overvoltage category: CAT III 300 V
    Protection rating: Front IP54, housing IP20
  • Dimensions: Control panel installation: 96 x 96 x 80 mm

Cần tư vấn hoặc báo giá? Chuyên gia của chúng tôi phản hồi trong 2 giờ làm việc.

30 năm kinh nghiệm · Hơn 500 dòng thiết bị đo lường · Hỗ trợ kỹ thuật trọn vòng đời sản phẩm