Computer controlled LABKON P series KONSTANTERs provide users with manually and remote controllable DC power supplies for laboratory and systems use.

The series of instruments offers nominal power ranging from 500 to 800 W with output voltages from 35 to 120 V and current up to 22.5 A

They’re distinguished by good dynamic response in the event of setpoint changes and sudden load changes. Rated nominal values can be continuously delivered thanks to the highly stable power output and can always be replicated thanks to precise digital setpoint entry, thus assuring reproducible results.

The user can save individualized device configurations to the setup memory module and retrieve them as required. This ensures a time-saving device configuration procedure for recurring periodic tests.

In addition to the RS 232 port included as standard equipment, USB and GPIB (IEEE 488) ports are also available as options. Furthermore, the use of an SCPI command set permits trouble-free integration into automated test systems.

Short Name  LSP 100-18  LSP 100-36  LSP 100-72 Article No. K110A K111A K112A Type 32K18R5 32K36R3 32K72R1.5 Front panel output 1 1 1 Output voltage 0 to 18 V 0 to 36 V 0 to 72 V Output current 0 to 5 A 0 to 3 A 0 to 1.5 A Voltage setting resolution
 
Current 1 mV at 0 ~ 3.999 V 5mV at 4~18V  10mV at 4~36V  20mV at 4~75V  < = 1 mA Mains correction, voltage
 
Current 0.01% + 3 mV 0.02% + 10 mV 0.02% + 8 mA Load correction, voltage

Current

0.02% + 10 mV 0.02% + 8 mA Ripple < 2 mV RMS Mains input 115 / 230 V AC   50 / 60 Hz Dimensions 
WxHxD (mm)  ½ 19", 2 standard height units,
 approx. 215 x 100 x 280 Weight  approx. 6 kg