Mô tả

The All-Rounder

The universal, user-friendly compact device in 1/16 DIN format (48 x 48 mm) is well suited for precision control tasks without overshooting, as well as for temperature limiting.

The integrated infrared interface in the front panel and the RS485 MODBUS
interface make it possible to configure the controller with CompactConfig software either online or offline, and allows for online viewing of the control process, as well as read-out and storage to memory of values from the data logger and alarm history.

Thanks to IP 67 protection at the front panel, it can be used in machinery and equipment manufacturing, as well as in the food processing and luxury food industries.

PDPI - Algorithm for Induction Heating Systems - see special items below
pH-Value Control - see special items below
Virtual analog outputs
Ratio control
Billing of several measuring inputs to determine the controlled variable
Cycle time: 10 ms per channel
Overshoot-free PDPI controller, limit transducer, cyclic duration controller
Freely configurable control channels
Control parameter adaption can be started at any time
2-step, 3-step controller, continuous action, step-action and split-range controller
Fixed value, cascade, differential and switch controller
Data logger, 3600 sampling values each from setpoint and actual value for 8 channels
Alarm history records up to 100 error states with timestamp
Cost Reduction for Energy via Intelligent Power Limitation -> more
Hot-runner control with actuating circuit and booster circuit
Water cooling control (non-linear cooling effect with evaporation)
Actual value management by groups for the avoidance of thermal stressing
Remote cold junction - only with original cold junction Z306A possible
2nd set of parameters
Setpoint ramp
Feed-forward control for the avoidance of undershooting and overshooting
Control zones can be assigned to groups
All zones can be deactivated as desired with internal or external signal
Absolute or relative limit value monitoring, start-up inhibiting, normally open /
normally closed contact
8 sensor inputs, thermocouples or Pt100, individually selectable with software
Monitoring for sensor breakage, cable interruption, polarity reversal and
short-circuiting
Regulated temperature becomes active in the event of sensor breakage
Resistant to interference caused by leakage current at thermocouples
16 binary inputs / outputs with short-circuit detection and self-restoring overload
protection
Heating circuit monitoring without additional transformer
Voltage compensated heating current monitoring with external standard transformer
Remote diagnosis with numerous monitoring functions
Mapping - checks sensor-heater assignment
RS 232 service interface for configuration and data exchange with free software
24 V DC power supply
3 Years Warranty
Made in Germany

R2500

Mô tả

Có thể bạn quan tâm

Đầu dò cho đồng hồ so Peacock XS-330

Liên hệ

Panme đo ngoài điện tử đầu nhỏ Mitutoyo 331-363-30

Liên hệ

Thước kẹp đồng hồ Insize 1311-300A

Liên hệ

SINEAX TV809

Liên hệ

Đồng hồ so cơ khí một vòng đo Peacock Z series 196Z

Đế gá đồng hồ so với chân đế từ MarStand 1492B–5

Liên hệ

Liên kết nhanh

Dịch vụ khách hàng

Kết nối với chúng tôi

Liên hệ với chúng tôi

R2500

Mô tả

Có thể bạn quan tâm

Đầu dò cho đồng hồ so Peacock XS-330

Liên hệ

Panme đo ngoài điện tử đầu nhỏ Mitutoyo 331-363-30

Liên hệ

Thước kẹp đồng hồ Insize 1311-300A

Liên hệ

SINEAX TV809

Liên hệ

Đồng hồ so cơ khí một vòng đo Peacock Z series 196Z

Đế gá đồng hồ so với chân đế từ MarStand 1492B–5

Liên hệ

Bộ lọc

Lọc kết quả