Bộ đo tốc độ laser tiếp xúc quang học A2103/LSR/K
Hỗ trợ bán hàng
The A2103/LSR/K Optical-Contact Laser Tachometer Kit is a very versatile multipurpose Tachometer with both Optical or Contact rpm, linear rate, distance ranges, a additional remote Laser Optical Sensor for rpm monitoring in difficult access applications, the unique inverting display, allows easy reading when in a limited access situation, an optical range of up to 2 metres, the optical performance is second to none, the time and Count modes, data capture and very fast response modes, 0.1 seconds update time, traceable certificates supplied as standard.
Signal Input features: 5v Pulse Signal is via the 3.5mm stereo Jack socket on the rear of housing which can be used with one of our remote optical sensors, alternatively it can be used to measure any pulse rate signal up to 5v pp.
Contact Measurement: Measurement units: Revolutions, Metres, Feet, Yards per Minute and per Second or length in 0/1 metres units Time interval or reciprocal speed for very slow rates in seconds/revolutions, Count mode: Counts distance or revolutions.
Maximum speed with Contact Adaptor: Governed by upper speed limit of bearings and is affected by measurement duration, typically 50,000 rpm for 10 Seconds. Maximum linear rate is typically 1,500 metres/minute or 4,500 feet/minute.
Special capture and Averaging features
- Maximum: Captures maximum speed in 0.1 seconds
- Minimum: Captures minimum speed in 0.1 seconds
- Time-base: 0.1 seconds in Capture mode
- Average: Averages over last 8 readings
Scope of Supply
- Instruction Manual
- A2103/LSR/K Optical-Contact Laser Tachometer
- MiniVLS 311/001 Plain Housing and 3.5mm Jack Plug
- Carrying Case
- Reflective Tape
- Certificate of Calibration
- A2100/01 Advent Contact Adaptor
Custom Cables can be made to order: Please contact Sales for now information.
Chưa có câu hỏi cho sản phẩm này.
Những câu hỏi trả lời bởi store